Specification
Exposure 3010S2 Pre Amplifier
• Gain (at 1KHz) : +18dB
• Sensitivity : 250mV
• Maximum output : >10V RMS
• Frequency response : -3dB at 1Hz and 56KHz, ref. 1KHz, max volume
• Total Harmonic Distortion : <0.01% @ 1.6V RMS output, 1KHz
• Signal to Noise ratio : >96dB, A weighted, ref. 1.6V RMS output, 1KHz
• Channel Separation : >60dB 20Hz to 20KHz (Typically > 85dB@ 1KHz)
• Outputs : 2 pairs RCA, pre amp output, 1 pair for tape output
• Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
• Power Consumption : <25VA
• Dimensions - H x W x D : 90mm x 440mm x 300mm
• Nett Weight (unpacked) : 7kg
• Gross Weight (packed) : 9kg
Exposure 3010S2 Stereo Power Amplifier
• Power Output (Stereo) : 110 Watts per channel at 1KHz into 8 Ohms
• Input Impedance : 18K Ohms
• Frequency Response : 20Hz - 20Khz ± 0.5dB
• Total Harmonic Distortion : <0.015% at rated output, ref. 1KHz
• Signal to Noise Ratio : >100dB, ref. rated output
• Channel Separation : >60dB, 20Hz - 20KHz
• Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
• Power Consumption : <400VA, 8 Ohm load both channels driven
• Dimensions - H x W x D : 115mm x 440mm x 300mm
• Nett Weight (unpacked) : 12kg
• Gross Weight (packed) : 14kg
